Philodendron Cream Splash Care And Propagation

Philodendron Cream Splash
Philodendron Cream Splash

Philodendron cream splash brightens the environment with its vibrant green tones, which gracefully create an abstract pattern on the leaves. It also goes by the names Variegated Brazil or Brasil Tricolor due to the cream, light green, and dark green hues of its leaf.

The advice in the following article will help you take care of your Cream Splash Philodendron plant and address any issues you and your plant may encounter.

Its full name is Philodendron hederaceum Cream Splash since it is a hybrid of the Philodendron hederaceum. Because of the shape of its leaves, some people refer to it as the Sweetheart Plant or the Heart Leaf Philodendron.

The plant’s long, leaf-filled tendrils are what is most recognizable about it. Although it looks wonderful as a trailing plant in a hanging basket, it will cheerfully climb up a pole.

Philodendron Cream Splash Care

Indirect lighting that is bright to medium-bright is ideal for the Philodendron Cream Splash. The leaves of this plant are widely variegated, thus excellent lighting is crucial.

Although the plant can take low light, I don’t recommend it. Because of the fading of the plant’s variegations in low light, even though the plant won’t be harmed. The cause is that variations show up because of a deficiency or absence of chlorophyll.

Significantly, chlorophyll is also responsible for absorbing light, which the plant uses for photosynthesis.

Therefore, despite the fact that the yellow and white variegations are gorgeous. They do not improve the health of the plant as a whole because they are not involved in photosynthesis like the green portion of the leaves is.

Because some of its leaves lack chlorophyll, the plant prefers a site that receives enough light.

Having said that, you should use caution when using excessive light. The leaves will become bleached and lose their vibrant colors in really strong, concentrated light. The leaves burn intensely, and you can see brown streaks and patches on them as well.

Avoid exposure to direct sunlight, especially during the summer and midday when the sun is at its utmost intensity.

Cream Splash Philodendron Temperature

A tropical plant is called the Philodendron Cream Splash. This indicates that it experiences warm temperatures between 64 and 81 degrees Fahrenheit. The ideal climate is one that is continuously warm all year long.

This is because there are no winters in the tropics, where the weather is always warm to scorching. It is hence largely consistent. Skiers can enjoy similar conditions all year long in sunny regions. And the plant prefers this the most. It thrives indoors because of this.

Since humans feel most comfortable in a temperature range of 65 to 75 degrees Fahrenheit, this is the range that most homes maintain. Additionally, we value consistency.

As a result, the Philodendron Cream Splash thrives in a home environment.

It’s crucial to remember that the plant does not handle cold well because there are no winters in the tropics. It isn’t really cold-hardy. And when the temperature falls below 50 degrees Fahrenheit, it will experience issues.

So, inside the home, be cautious of air conditioners and chilly draughts coming through windows. Attempt to avoid having the plant near these.

During the summer, you can move the plant outside. But once the weather falls below about 50 degrees in the fall, make careful to bring it back inside. In the winter, don’t leave it outside because it can’t stand the cold.

Only those who reside in USDA Hardiness Zones 9 to 11 are exempt from this. The vegetation in this location is content both indoors and outside. It can remain outside all year because the climate in these places is warm and sunny every day.


A humidity of 60% to 70% is preferred by the Philodendron Cream Splash. However, it won’t be harmed by humidity levels of 40% or more.

Keep the humidity at least at 50% if you want the plant to develop bigger leaves and more bright colors.

You should be on the lookout for brown edges and tips. When the humidity is too low, these will become dry, crispy, and brittle. This is your warning indication as a result. Sadly, the brown regions will never revert back to their previous hues. Therefore, you must prune those portions.

This may occur if the indoor air is too dry for the plant to tolerate. It can also occur in the winter, which is infamous for drying up the air. This is why, as a precaution, I like to have a hygrometer close to my plants. It informs me of the humidity level at any given moment.

I’ll start assisting the humidity-sensitive plants if the temperature falls to the low 30s. This can be accomplished by spraying the plants or using a humidifier. Making a pebble tray or a humidity tray and placing the plant inside is a free, hands-free option.

Philodendron Cream Splash Water

In general, watering the Philodendron Cream Splash should be done once per week. However, when the seasons change, you must monitor the weather. If you live in a southern state like California, Texas, Arizona, or Florida, this is less of a problem.

You may adopt a similar watering schedule with a few adjustments for summer and late in the year because the sun is up all year and the weather is generally predictable. However, if you reside in a climate with four distinct seasons, you will need to water at different times in the summer and winter.

During the summer, you can find yourself watering twice or even three times every week. In the winter, only once every two to three weeks. This is so that soil can dry more quickly or more slowly depending on how hot or cold it is outside.

Therefore, following a set watering schedule is not a smart idea. This is a surefire technique to drown the plant with water during the winter.

Instead, hold off on adding water until the top 2 inches of soil are fully dry. Before watering, I prefer to wait until the soil is roughly 50% dry. Your minimal threshold to prevent overwatering is the first option. The latter, on the other hand, is a more secure and cautious strategy.

Nevertheless, since you may avoid watering too frequently, both approaches are effective. The roots also remain in the damp soil. Avoiding overwatering is crucial since it not only causes leaves to become yellow but also raises the danger of root rot. Because of this, overwatering is the main reason why houseplants die.

Cream Splash Philodendron Soil

Potting Soil for Philodendron Cream Splash The Philodendron Cream Splash requires loose, well-draining soil that is also highly aerated. Additionally, it will value soil with high organic content. The plant is a hemiepiphyte, which makes proper drainage and aeration essential. As a result, it starts off as an epiphyte that clings to trees. But it will grow roots into the ground over time.

As a result, even though the forest’s roots are frequently wet due to rain, they dry out rapidly since they are exposed to air. The Philodendron Cream Splash requires proper drainage and aeration because of this. Its roots, on the other hand, dislike spending a lot of time in the water. Additionally, this type of soil will stop waterlogging.

I think an aroid mix makes the greatest soil for this plant. However, anything with good drainage can be used. Aroid mix is available in packages from your neighborhood nursery or preferred online plant retailer.


During the growing season, fertilize the Philodendron Cream Splash using a water-soluble, balanced fertilizer once a month to promote healthy development.

Additionally, each time you apply it, weaken it by half from the prescribed strength. Remember, if the soil is dry, avoid fertilizing the plant. You can use slow-release fertilizer in addition to conventional fertilizer.

You disperse the pellets to apply since they are in pellet form. As the nutrients release at different times during the growing season, you only need to apply 1-2 times. Fish emulsion is another organic, less expensive choice.

It is simple to use and very effective for the plant. However, be wary of the fishy scent. Applying in a closed space will make it scent shady for a while. The smell will disappear once the formulation has dried on the soil. Instead, you can use compost or worm castings as topdressing. Apply by covering the soil with a coating each spring.


The Philodendron Cream Splash is a fast-growing plant that requires little maintenance and is easy to care for. The plant doesn’t require a lot of pruning, despite the fact that it grows swiftly and can climb up walls to reach heights of 10 to 20 feet. That’s because the plant’s attractiveness derives from its leaves.

It can be climbed as well as placed in a hanging pot or basket with the long stems trailing. The bright foliage gives this a wonderful appearance.

Once it becomes really bushy, the plant may appear a little disorganized. Others, though, don’t like it as much. You decide when to prune, so. Nevertheless, when pruning, try to refrain from removing more than 30% of the plant at once. Its growth may be hampered and stressed out by this. Spread out the task over a few weeks or months instead.

Splash Cream Philodendron Propagation

Stem cuttings enable the Cream Splash Philodendron to grow quickly. As a result, by using healthy stems to create new plants, you can propagate new plants. How to grow Philodendron Cream Splash from stem cuttings is shown here.

Take good stem cuttings to start. Pick stems or stem tips with two or more leaves and at least one node. Just below the node, trim the stems. After that, you can choose between growing the cuttings in water or in soil for propagation.

In water

Put the cuttings in a water-filled container. The nodes of the cuttings should be submerged. However, take out any leaves that go into the water. Keep the upper leaves alone.

Before the roots become sufficiently long, it will take three to four weeks. But after roughly 7–10 days, you ought to start noticing some tiny roots sprouting.

You can move the cuttings and put them into the soil if the roots are approximately 2-4 inches long.

Cuttings must be propagated in soil.

In Soil

Make a pot, then fill it with dirt that drains nicely. Make sure the nodes of the stem cuttings are buried in the soil before planting.

To keep the soil moist, water it. Leave the pot in a room that is well-lit, has good humidity, and has indirect light The roots will start to take hold and begin to establish themselves in the soil in around 4-6 weeks. Take a few cuttings and group them in a pot if you want a bushier plant. Compared to merely using 1-2 cuttings per pot, this will result in more stems and leaves.

Is Philodendron Cream Splash toxic to humans, cats, and dogs?

When consumed, the Philodendron Cream Splash is poisonous. This occurs as a result of the release of insoluble calcium oxalate crystals. The tissues and interior lining of your mouth, tongue, throat, esophagus, and digestive system will also be punctured.

Leave a Reply

Your email address will not be published. Required fields are marked *